Pharmacokinetic Calculator
Non-compartmental Cmax, Tmax, AUC, half-life, clearance and volume.
Enter your values to see the result.
Non-compartmental analysis: λz comes from a log-linear regression of the last points, AUC₀–∞ = AUC₀–t + C_last ÷ λz, CL = dose ÷ AUC₀–∞ and Vz = CL ÷ λz. For oral dosing CL and V are apparent values divided by bioavailability (CL/F, Vz/F).
Processing and privacy
Processing varies by tool. Check the instructions for local processing, server requests, external services and any file or request limits before entering sensitive information.
Read the privacy policyHow this calculation works
Understand the method, inputs and limits behind your result.
- Formula
- Integrate concentration over time by linear or linear-up/log-down trapezoids. Terminal elimination λ is minus the regression slope of log concentration on time. Half-life = ln(2)/λ; AUC∞ = AUC₀–t + last concentration/λ; clearance = dose/AUC∞; volume = clearance/λ.
- Variables
- Dose
- Route: IV bolus, Oral / extravascular
- Time (h), concentration (mg/L), one pair per line
- Points for terminal slope
- AUC method: Linear trapezoidal, Linear up / log down
- Units
- Dose: mg
- Example
- A 500 mg oral dose peaking at 9.4 mg/L at 2 h has a terminal half-life of 4.2 h and an AUC₀–∞ of 72.5 mg·h/L.
- Assumptions
- Non-compartmental analysis: λz comes from a log-linear regression of the last points, AUC₀–∞ = AUC₀–t + C_last ÷ λz, CL = dose ÷ AUC₀–∞ and Vz = CL ÷ λz. For oral dosing CL and V are apparent values divided by bioavailability (CL/F, Vz/F).
- Source
- ToolzHive calculation guide and calculator implementation. External reference verification is pending.
- Last reviewed
- Review date not yet recorded.
Methodology & References
The method depends on the selected model and input options. Review the assumptions and references above before interpreting the result.
- Enter the dose and route, then paste time, concentration pairs.
- Choose how many terminal points to use and the AUC method.
- Read Cmax, Tmax, AUC, half-life, clearance and volume.
Interpretation and limitations
- What is the linear-up/log-down method? It uses straight lines while levels rise and exponential curves while they fall, which is more accurate for elimination phases.
- Why are clearance and volume “apparent” for oral doses? Without IV data the bioavailability F is unknown, so the results are CL/F and Vz/F.
References
External reference verification is pending. The formula and examples describe the current ToolzHive implementation.
Share this tool
Found it useful? Send it to a friend or teammate.
Rate this tool
0.0
0 ratings
- 5 stars 0
- 4 stars 0
- 3 stars 0
- 2 stars 0
- 1 star 0
Clear instructions
Find steps, examples and limitations below.
Use online
Open the tool in a supported web browser.
Free to use
No sign-up required. Tool-specific limits may apply.
How to use the Pharmacokinetic Calculator
Non-compartmental Cmax, Tmax, AUC, half-life, clearance and volume.
- 1 Enter the dose and route, then paste time, concentration pairs.
- 2 Choose how many terminal points to use and the AUC method.
- 3 Read Cmax, Tmax, AUC, half-life, clearance and volume.
Example and practical tips
A 500 mg oral dose peaking at 9.4 mg/L at 2 h has a terminal half-life of 4.2 h and an AUC₀–∞ of 72.5 mg·h/L.
Frequently asked questions
What is the linear-up/log-down method?
It uses straight lines while levels rise and exponential curves while they fall, which is more accurate for elimination phases.
Why are clearance and volume “apparent” for oral doses?
Without IV data the bioavailability F is unknown, so the results are CL/F and Vz/F.
Practical guides
-
How to Use Pharmacokinetic Calculator
Non-compartmental pharmacokinetics from time–concentration data: Cmax, Tmax, AUC to last and infinity, λz, half-life, MRT, clearance and volume.
Report an issue
Something broken or not quite right? Tell us and we will look into it.